Exclusively at raceparts.cc: Steel oil pan for BMW E30 4-cylinder engines (M40, M42).
No more cracked oil pans. The steel oil pan is 2.3 cm flatter and still has the same volume as the original oil pan!
Tried and tested over many years, also in rallies in the 318is Cup
The scope of delivery includes
- Oil pan
- Gasket
- Copper sealing ring
- Installation instructions
Installation instructions steel oilpan
Since the sealing surface is not milled, it is recommended to coat the sealing surface with sealant on both sides. Due to the narrower shape, the oil suction pipe in the area of the lower sheet metal funnel has to be shortened by approx. 2 cm. Remove and cut off with an angle cutter, deburr and clean. A small edge must stay, otherwise the sieve will fall out. Then install with a new gasket and sealant. Cut the tube of the dipstick with a saw by about 2 cm and deburr.
Parts no. Suction tube seal: 11411715116
The volume of the oil pan is identical to the original oil pan. The filling quantity therefore remains unchanged.